Elenco Electronics SP-3B Manual de Instruções descarregar pdf (Página 2)

-1-

SAFETY PRECAUTIONS

Like all electrical devices, the solder station must be

handled with care. The soldering iron and tip can

reach high temperatures and these simple safety

rules should be followed.

1. If the problem indicator light is on, do not use

the soldering station at that outlet. A wiring

problem may exist at the outlet. Refer to Problem

Indicator Light Section on page 3 for details on

problems.

2. Keep children out of reach of the soldering station.

3. To protect your eyes, use safety goggles.

4. Keep flammable material away from the soldering

iron.

5. DO NO

T cool ir

by dipping it into any liquid or

water.

6. Always assume that the tip is hot to avoid burns.

7. Work in an area that is well ventilated.

8. Be careful that the hot soldering iron tip or the

barrel of the iron does not come in contact with

any electrical cord.

SOLDERING STATION KIT MODELS

These instructions are for the following electronic soldering stations. The model number of the electronic

soldering station that you have received, is marked on the end of the carton.

Model SL-5K is supplied without an iron.

Model SL-5K-40 is supplied with a 40 watt soldering iron, grounded plug, Model SR-6.

Model SL-5K-SPL is custom packaged with an iron of your choice of 25 to 60 watts, and other soldering

aids. A separate packing slip of the additional items will be enclosed.

The SL-5 series of soldering stations are quality

products designed to give the professional, student

and hobbyist greater control in quality soldering a

broad range of soldering situations. The stations are

available with variable wattage irons. The AC

receptacle on the back of the station allows soldering

irons of up to 300 watt. The AC receptacle also

allows irons to be easily changed or replaced.

A special safety feature (patent pending) of the SL-5

is its ground fault detection circuit, which warns you if

your station is not properly connected to earth

ground, if your hot and ground wires are reversed, or

if your hot and neutral wires are reversed. This is

important when working with today's static-sensitive

electronic components and is critical for safety when

working with high-voltage circuitry.

If you have received a solder practice kit SP-1A or

SP-3B with this kit, do the solder practice first before

assembling the solder station. Learning to solder

properly is essential to good working electronic

circuitry.

FEATURES

• Regulation of Temperature

• Ground Fault Safety Circuit

• Heavy Steel, Non-Slip Base

• Iron Holder Funnel - Reversible, left or right side

• Steel Tray for Sponge Pad

• Sponge Pad

• Power On/Off with Indicator Light

INTRODUCTION

1 2 3 4 5 6 7 ... 19 20

Comentários a estes Manuais

Sem comentários

Elenco Electronics SP-3B Manual de Instruções Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com não Elenco Electronics SP-3B